Bromine in triple mesoscopic hole-conductor-free perovskite solar cells - CEA - Commissariat à l’énergie atomique et aux énergies alternatives Access content directly
Conference Papers Year : 2021

Bromine in triple mesoscopic hole-conductor-free perovskite solar cells


Within the challenging race for alternative energy sources, hybrid metal halide perovskite solar cells (PSCs) have undergone unprecedented progress with efficiencies reaching now 25.5% [1-3]. These remarkable performances result from the exceptional optoelectrical properties of hybrid perovskite materials. Coupled with their potential for low fabrication cost, perovskite solar cell technology is very promising. However, since hybrid halide perovskites have a highly ionic character, they can decompose under external stresses such as moisture, solvents and heating cycles [4-6]. Reducing environmental stresses imposed by moisture or oxygen for example, in order to improve the long-term stability of perovskite solar cells, is critical to the deployment of this technology. In 2017, Grancini et al [7] published a structure proven to be stable for more than 10,000 hrs, measured uned controlled standard conditions, by engineering an ultra-stable 2D/3D (HOOC(CH2)4NH3)2PbI4/CH3NH3PbI3 perovskite junction. This structure is based on a fully printable architecture made of three mesoporous layers in which the perovskite is embed. In this communication, we investigate the effects of changing the perovskite composition in this architecture by adding and/or replacing iodine with bromine into its chemical composition to tune device, increasing the band gap of the material [8], opening the gate to potential application in water splitting (VOC > 1.23 V at pH = 0 [9]). After characterization of their photovoltaic properties, the cells, reaching VOC ~1.3 V are studied by SEM coupled to EDX, XRD, Raman, absorption and photoluminescence spectroscopies. 1. Green, M. A., Ho-Baillie, A. & Snaith, H. J. The emergence of perovskite solar cells. Nature Photonics 8, 506–514 (2014). 2. Green, M. A. & Ho-Baillie, A. Perovskite Solar Cells: The Birth of a New Era in Photovoltaics. ACS Energy Lett. 2, 822–830 (2017). 3. Best Research Cell Efficiencies. NREL (2021). 4. Berhe, T. A. et al. Organometal halide perovskite solar cells: degradation and stability. Energy Environ. Sci. 9, 323–356 (2016). 5. Leijtens, T. et al. Stability of Metal Halide Perovskite Solar Cells. Adv. Energy Mater. 5, 1500963 (2015). 6. Rong, Y., Liu, L., Mei, A., Li, X. & Han, H. Beyond Efficiency: the Challenge of Stability in Mesoscopic Perovskite Solar Cells. Adv. Energy Mater. 5, 1501066 (2015). 7. Grancini, G. et al. One-Year stable perovskite solar cells by 2D/3D interface engineering. Nature Communications 8, 15684 (2017). 8. Yu, W. et al. Diversity of band gap and photoluminescence properties of lead halide perovskite: A halogen-dependent spectroscopic study. Chemical Physics Letters 699, 93–98 (2018). 9. Walter, M. G. et al. Solar Water Splitting Cells. Chem. Rev. 110, 6446–6473 (2010).
No file

Dates and versions

cea-03583343 , version 1 (21-02-2022)


  • HAL Id : cea-03583343 , version 1


Hindia Nadhi, Sarah Cherif, Frédéric Oswald, Stéphanie Narbey, Olivier Plantevin, et al.. Bromine in triple mesoscopic hole-conductor-free perovskite solar cells. MRS FAll meeting, MRS, Nov 2021, Boston, United States. ⟨cea-03583343⟩
84 View
0 Download


Gmail Facebook X LinkedIn More