Development of a new bench for puncturing irradiated fuel rods in the STAR hot laboratory - CEA - Commissariat à l’énergie atomique et aux énergies alternatives Access content directly
Conference Papers Year : 2017

Development of a new bench for puncturing irradiated fuel rods in the STAR hot laboratory


A new device for puncturing of irradiated fuel rods in commercial power plants has been designed by Fuel Research Department of CEA Cadarache in order to provide experimental data of high precision on fuel pins with various designs. It will replace the current set-up that has been used since 1998 in hot cell 2 of STAR facility with more than 200 rod puncturing experiments. Based on this consistent experimental feedback, the heavy-duty technique of rod perforation by clad punching has been preserved for the new bench. The method of double expansion of rod gases is also retained since it allows upgrading the confidence interval of volumetric results obtained from rod puncturing. Furthermore, many evolutions have been introduced in the new design in order to improve its reliability, to make the maintenance easier by remote handling and to reduce experimental uncertainties. Tightness components have been studied with Sealing Laboratory Maestral at Pierrelatte so as to make them able to work under mixed pressure conditions (from vacuum at 10$^{-5}$ mbar up to pressure at 50 bars) and to lengthen their lifetime under permanent gamma irradiation in hot cell. Bench ergonomics has been optimized to make its operating by remote handling easier and to secure the critical phases of a puncturing experiment. A high pressure gas line equipped with high precision pressure sensors out of cell can be connected to the bench in cell for calibration purposes. Uncertainty analyses using Monte Carlo calculations have been performed in order to optimize capacity of the different volumes of the apparatus according to volumetric characteristics of the rod to be punctured. At last this device is composed of independent modules which allow puncturing fuel pins out of different geometries (PWR, BWR, VVER). After leak tests of the device and remote handling simulation in a mock-up cell, several punctures of calibrated specimens have been performed in 2016. The bench will be implemented soon in hot cell 2 of STAR facility for final qualification tests. PWR rod punctures are already planned for 2018.
Fichier principal
Vignette du fichier
201700001233.pdf (1.12 Mo) Télécharger le fichier
Origin : Files produced by the author(s)

Dates and versions

cea-02434015 , version 1 (09-01-2020)


  • HAL Id : cea-02434015 , version 1


B. Petitprez, P. Silvestre, P. Valenza, A. Boulore, T. David. Development of a new bench for puncturing irradiated fuel rods in the STAR hot laboratory. ANIMMA-2017 - Session 5 “Nuclear Fuel Cycle”, Jun 2017, Liège, Belgium. ⟨cea-02434015⟩


21 View
59 Download


Gmail Facebook X LinkedIn More