Model for core catcher ablation and cavity shape in the film regime
Résumé
During core meltdown in a nuclear reactor the corium may propagates toward the lower and hit the vessel or structural elements as a coherent liquid jet. This could occur for instance in sodium fast reactors (SFR) if discharge tubes and an in-vessel core-catcher are used as mitigation devices. This can result in the ablation of the core-catcher and potential loss of its integrity. During ablation, a cavity is formed within the solid. Therefore the ablation of a solid structure by a liquid jet is studied here, with a focus on the cavity shape to improve future core-catcher designs. During the cavity formation, liquid flows over the cavity being formed as a liquid film in the film ablation regime, and ultimately results in the formation of a liquid pool. In the film ablation regime, two types of cavity shapes have been identified previously. To describe the process of the cavity formation, a mathematical model valid in this film ablation regime is here proposed which links the local melting rate to the local curvature of the cavity. It is applied with two sets of assumptions applicable to the two types of cavity previously identified. For the first assumption set, the heat transfer coefficient varies along the liquid/solid interface while the liquid temperature is held constant, it is representative of laminar boundary layer growth in laminar film. For the second assumption set, the heat transfer coefficient is held constant while the temperature varies along the liquid/solid interface, this is consistent with a turbulent liquid film. The two modeling approaches are compared with experimental data acquired from the HAnSoLO experimental setup. Model for core catcher ablation and cavity shape in the film regime
| Origine | Fichiers produits par l'(les) auteur(s) |
|---|---|
| Licence |
