Article Dans Une Revue IEEE Open Journal of Antennas and Propagation Année : 2021

Miniaturization of a Filter-Antenna Device by Co-Design

Résumé

This paper presents a novel miniaturization approach by co-designing together a filter and an antenna. Indeed, contrary to a classical filter-antenna design, which presents a 50 Ω transition between the filter and the antenna, the co-design methodology proposed in this paper will prove that both the antenna and the filter can be optimized on a complex impedance. For this impedance, different from 50 Ω, the antenna volume can be reduced by more than 50% while presenting a high radiation efficiency. Moreover, the filter performance will be optimized on complex impedance loads without being affected compared to a classical 50 Ω filter. This new approach will be detailed and compared to a classical one in order to validate the improvement achieved by this co-design methodology. Prototypes have been manufactured and measurements confirm the benefits observed during the design phase.
Fichier principal
Vignette du fichier
Miniaturization_of_a_Filter-Antenna_Device_by_Co-Design.pdf (2) Télécharger le fichier
Origine Publication financée par une institution
licence

Dates et versions

hal-03222039 , version 1 (17-02-2025)

Licence

Identifiants

Citer

Laure Huitema, Y. Dia, Marc Thevenot, S. Bila, A. Perigaud, et al.. Miniaturization of a Filter-Antenna Device by Co-Design. IEEE Open Journal of Antennas and Propagation, 2021, 2, pp.498-505. ⟨10.1109/OJAP.2021.3070214⟩. ⟨hal-03222039⟩
23 Consultations
0 Téléchargements

Altmetric

Partager

More