X. Litaudon, J. Bernard, L. Colas, R. Dumont, A. Argouarch et al., Physics and technology in the ion-cyclotron range of frequency on Tore Supra and TITAN test facility: implication for ITER, Nucl Fusion, vol.53, p.83012, 2013.

P. Lamalle, B. Beaumont, F. Kazarian, T. Gassmann, G. Agarici et al., Status of the ITER ion cyclotron H&CD system, Fusion Eng Des, vol.88, pp.517-537, 2013.

A. Borthwick, G. Agarici, A. Davis, P. Dumortier, F. Durodie et al., Mechanical design features and challenges for the ITER ICRH antenna, Fusion Eng Des, vol.84, pp.493-499, 2009.

F. Ferlay, J. Bernard, C. Dechelle, L. Doceul, D. Keller et al., First analysis of remote handling maintenance procedure in the hot cell for the ITER ICH&CD antenna-RVTL replacement, Fusion Eng Des, vol.88, pp.1924-1932, 2013.

, 3D morphologies and depth profiles of the worn samples: (a). plate sample; (b)

J. Hillairet, A. Argouarch, R. Bamber, B. Beaumont, J. Bernard et al., R&D activities on RF contacts for the ITER ion cyclotron resonance heating launcher, Fusion Eng Des, vol.96, pp.477-81, 2015.
URL : https://hal.archives-ouvertes.fr/cea-01144581

S. Calatroni, R. Perret, and W. Vollenberg, RF contacts for the LHC collimators, nuclear instruments and methods in physics research section a, Accel Spectrom Detect Assoc Equip, vol.566, pp.205-216, 2006.

R. , Modeling of the RF-shield sliding contact fingers for the LHC cryogenic beam vacuum interconnects using implicit and explicit finite element formulations, 2008.

G. Durashevich, V. Cvetkovski, and V. Jovanovich, Effect of thermomechanical treatment on mechanical properties and electrical conductivity of a CuCrZr alloy, Bull Mater Sci, vol.25, pp.59-62, 2002.

A. Chatterjee, R. Mitra, A. Chakraborty, C. Rotti, and K. Ray, Comparative study of approaches to assess damage in thermally fatigued Cu Cr Zr alloy, J Nucl Mater, vol.474, pp.120-125, 2016.

S. Wikman, A. Peacock, O. Zlamal, J. Oijerholm, S. Tahtinen et al., Assessment of materials data for blanket materials within the European contribution to ITER, J Nucl Mater, vol.442, pp.414-423, 2013.

V. Barabash, G. Kalinin, S. A. Fabritsiev, and S. J. Zinkle, Specification of CuCrZr alloy properties after various thermo-mechanical treatments and design allowables including neutron irradiation effects, J Nucl Mater, vol.417, pp.904-911, 2011.

L. Morgan, J. Shimwell, and M. Gilbert, Isotopically enriched structural materials in nuclear devices, Fusion Eng Des, vol.90, pp.79-87, 2015.

M. Hoi-c, M. Hrgeti-c, and J. Deur, Design of a pin-on-disc-type CNC tribometer including an automotive dry clutch application, Mechatronics, vol.40, pp.220-252, 2016.

R. A. Nevshupa, M. Conte, A. Igartua, E. Roman, and J. L. De-segovia, Ultrahigh vacuum system for advanced tribology studies: design principles and applications, Tribol Int, vol.86, pp.28-35, 2015.

M. Kosinskiy, S. Ahmed, Y. Liu, and J. A. Schaefer, A compact reciprocating vacuum microtribometer, Tribol Int, vol.56, pp.81-89, 2012.

M. Hasler, K. Schindelwig, B. Mayr, C. Knoflach, S. Rohm et al., A novel ski-snow tribometer and its precision, Tribol Lett, vol.63, p.33, 2016.

K. Kalita, N. Das, P. Boruah, and U. Sarma, Design and uncertainty evaluation of a strain measurement system, MAPAN, vol.31, pp.17-24, 2016.

M. Rosol, A. Pilat, and A. Turnau, Real-time controller design based on NI Compact-RIO, IMCSIT, vol.2010, pp.825-855

V. Barabash, Summary of material data for structural analysis of the ITER vacuum vessel and ports, ITERÀ, vol.229, issue.7, 2008.

T. Nicholas, High cycle fatigue: a mechanics of materials perspective, 2006.

R. B. Sghaier, N. Majed, H. B. Dali, and R. Fathallah, High cycle fatigue prediction of glass fiber-reinforced epoxy composites: reliability study, Int J Adv Manuf Technol, vol.2017, pp.1-15

V. Barabash, Appendix A, materials design limit data, 2013.

P. G. Slade, Electrical contacts: principles and applications, 2013.

O. Yaglioglu, A. J. Hart, R. Martens, and A. H. Slocum, Method of characterizing electrical contact properties of carbon nanotube coated surfaces, Rev Sci Instrum, vol.77, p.95105, 2006.

V. Belous, G. Kalinin, P. Lorenzetto, and S. Velikopolskiy, Assessment of the corrosion behaviour of structural materials in the water coolant of ITER, J Nucl Mater, vol.258, pp.351-357, 1998.

J. H. Zheng, W. Bogaerts, and P. Lorenzetto, Erosion-corrosion tests on ITER copper alloys in high temperature water circuit with incident heat flux, Fusion Eng Des, vol.61, pp.649-57, 2002.

M. Bezzazi, A. Khamlichi, A. Jabbouri, P. Reis, and J. Davim, Experimental characterization of frictional behaviour of clutch facings using Pin-on-disk machine, Mater Des, vol.28, pp.2148-53, 2007.

P. Lamalle, B. Beaumont, F. Kazarian, T. Gassmann, G. Agarici et al., Status of the ITER ion cyclotron H&CD system, Fusion Eng Des, vol.88, p.517, 2013.